Wireless Hdmi Transmitter and Receiver 4k Kit.One Receiver and Two Transmitter Packages,Switch at Will,Matching Distance 50M VGA Dual Screen Casting Video Audio from PC/Laptop/TikTok to Monitor

Scenario and Function Introduction

Transform your living or workspace with our innovative Wireless HDMI Transmitter & Receiver Kit, allowing you to connect devices to your monitor, projector or television without the hassle of any wires or cables. Whether you're looking to improve your technology experience in the office, TV room or game den, it couldn't be more appropriate.This wireless HDMI receiver can be paired with up to 8 transmitters, making it ideal for more convenient meetings or situations where multiple people need to take turns speaking. Switching content freely without any delay, there is no need to manually switch complex HDMI cables for each speaker. This seamless enhances your workflow and showcases a high-end professional environment. (This device comes with 1 receiver and 2 transmitter, if you need additional transmitters, you can purchase them by searching ASIN: B0F8BFLQLG)

Easy to Install, Plug&Play, No drivers or software installation needed: simply plug the Transmitter into the HDMI port of your HDMI device

No need to install expensive, inconvenient cables. No software or WiFi connection required. Transmitter 2 x HDMI input, Receiver 1 x HDMI output;

Wireless Extend or Mirror your Computer or smartphone

Get rid of the complex wire connections, make meeting more convenient and efficient.

Use WiFi transmission technology, streaming HD@30Hz 3D movies, TV shows, video or games from your laptop, PC, gaming console, satellite box , HDSLR camera, tablet, smartphone or other HDMI devices to your HDTV , projector and monitor.

Note: Please connect the 5V1-2A charger when using the wireless HDMI receiver and transmitter. Because the TV USB and computer USB ports sometimes have insufficient power supply, which may cause interruption in the use process. In particular, the receiver must be connected with a charger.

Usage and installation steps

1. The correct procedure is to connect the receiver first to ensure a stable Wifi signal, and then connect the transmitter later.

2. Smartphones and tablets do not need a plug-in, they can be paired with a Wifi connection. (The exact steps can be found below：Instructions for connecting smartphones and tablets）

Transform your living or workspace with our innovative Wireless HDMI Transmitter & Receiver Kit, allowing you to connect devices to your monitor, projector or television without the hassle of any wires or cables. Whether you're looking to improve your technology experience in the office, TV room or game den, it couldn't be more appropriate.

Installation steps：

Step 1: Plug the transmitter into the HDMI or VGA port of your device (laptop, PC, satellite box, game console, DSLR camera)

Step 2: Connect the receiver to the desired screen through the HDMI or VGA port (You need to prepare Type-C cable and 5V/2A charger for the receiver), then press the play button.

Solution to the overclocking prompt on the screen of the connected receiver.

LNSTRUCTIONS TO SET 4K@30Hz

4K Resolution Description

STEP 1: The receiver has a resolution of 4K and can wirelessly project 4K images or movies from a phone or tablet onto a TV or monitor.

STEP 2: The transmitter has a resolution of 1080P. If the transmitter is connected to the receiver, the maximum output image will be 1920 * 1080P.

STEP 3: 4K resolution can only be used on mobile phones or tablets.

Apple Device

STEP 1: Connect device to the Receiver Wifi through the name "TuTuLink-xxxxxxxx” and password “12345678”.

STEP 2: Enter "192.168.168.1" in your internet browser.

STEP 3: Go to settings, click “resolution” and select "3840*2160".

Android Device

STEP 1: Click Wifi on the phone settings page, find and connect the MiraScreen device (Name “TuTuLink-xxxxxxxx” and password “12345678”).

STEP 2: Enter “192.168.168.1” in your mobile phone/tablet browser.

STEP 3: Go to settings, click "resolution" and select "3840*2160@30Hz".

STEP 4: Click on the internet and connect the home router Wifi.

LNSTRUCTIONS FOR CONNECTING SMARTPHONES AND TABLETS

Apple Device

Connect device to the Receiver Wifi through the name "TuTuLink-xxxxxxxx” and password “12345678”

Swipe down the phone screen, click Screen Mirroring

Enter "192.168.168.1" in your internet browser

Click on the internet and connect the home router Wifi

Android Device

Connect the home router Wifi

Click screen projection software in Android device. For example Smart View by Samsung and Wireless Projection by HUAWEI

Connect device to with TVs, projectors and monitors through the name "TuTuLink-xxxxxxxx”

Say Goodbye to Messy

One-Touch Disconnect ＆ Reconnect

Switch Between Multiple Devices

Silky Smooth Visual Experience

Long-Range Transmission Range

TROUBLESHOOTING

If no audio, please choose“TuTuLink-xxxxxxxx”as your laptop/PC's audio output.

If loss signal or overheated every 5 mins, please connect a USB C cable for transmitter and plug it to a 5V/1A USB charger.

If the HDMI kit, lost connection, please repair them.

If you meet other question, Please find our support team in the order background, I'm away there for help.

How to connect phone to TV?

Install the external antenna into the RX HDMI input device，And supply power for it.

Window: Win+P to find the mirror function, choose "TuTuLink-xxxxxxxx", wait auto casting.

Android: Find the mirror function, choose "TuTuLink-xxxxxxxx", wait auto casting.

IOS: (need more steps)

Go to the iPhone's Wifi setting, Wifi choose "TuTuLink-xxxxxxxx"

Click the website, access the IP address "192.168.168.1"

Click "Internet", choose your home Wifi and password, wait for the TV screen's icon in the upper right corner to show that the connection is successful, then back to iPhone's Wifi setting, Wifi choose your home Wifi.

Tap Airplay, choose "TuTuLink-xxxxxxxx", then it will auto stream.

CAUTION

POFAN wireless HDMI transmitter & receiver kit supports simultaneous video and audio transmission to your projector or display. If you encounter only synchronized video but not synchronized sound during use, please change your computer's sound output option to "EZCAST".

This package includes one receiver and 2 transmitters. The purpose is to provide convenience and cost savings for users who need multiple transmitters to work at the same time (no need to buy two sets of wireless HDMI kits).

Both transmitters have been paired successfully in advance, and support independent work without interfering with each other.

When two transmitters are required to work at the same time, just one-key switch, convenient and simple. Mostly used for company meetings. Allow multiple colleagues to share their work at the same time. Can also be used in the home. For example, when your home theater and your laptop need to be connected at the same time, one transmitter is not enough for your needs, you can buy this package.